Home » Paper Straw Machine » Straw Paper Slitting Machine » SLT-SHA800 High Speed Straw Paper Strip Roll Slitting Rewinding Machine

Contact us

Related News

content is empty!

Share to:

SLT-SHA800 High Speed Straw Paper Strip Roll Slitting Rewinding Machine

Quantity:
  • SLT-SHA800
  • SUNLIGHT

SLT-SHA800 High Speed Straw Paper Strip Roll Slitting Rewinding Machine

白底主图2


Usage

Machine in this series are mainly suitable for straw paper.


纸胶水吸管15                           



Feature

1. The machine use center winding and the surface drum rewinding 

2. Web guide system, automatic tension control system with magnetic powder brake and servo motor rewinding

3. Machine with meter counter , automatic stop

4. Frequency Inverter control main motor


Main technical parameter

Model

SLT-SHA800

Width of roll material

700mm

Max. Diameter of roll material

1000mm

Max. Diameter of rewinding roll

650mm

Min. Width of slitting

13.5mm,14mm and 15mm

Slitting Speed

0-300m/min

Total Power

15kw

Overall dimension ( L x W x H mm)

2200x2100x1400

Weight

2600kg


Mahchine Main Parts

The machine with unwinder , web guide , slitting system , rewinding unit ,transmission system ,electric control part , etc 


Specification

Unwinder

The machine with  Manual horizontal alignment , Eliminates tension and wrinkles caused by the thick ends or uneven cores of the raw materials

The high linear magnetic powder brake is used as the unwinding tension actuator. The output torque is balanced, and the tension fluctuation can be reduced to the lowest state. The Siemens PLC automatically detects and calculates the size of the material through online and automatically controls the unwinding tension output.

Loading Materila , pneumatic lift loading (Optional Unit )

Air Shaft Unwinder, 100NM magnetic powder brake tension controled by PLC

Web Guide Control Ssyem

Slitting System

The machine uses a round knife to cut, the incision is neat, and the service life is long. The upper and lower knife axes of the slitting are widened, and the speeds of the upper and lower knife shafts are matched by the gears. Rotate the hand wheel to implement the knife, and continue turning to achieve automatic knife.

A, Slitting shaft , 1 set Top knife shaft and 1 set bottom knife shaft

B, Locking device: With a rapid tool setting device, it can lock the upper knife shaft to avoid cutting quality problems caused by the upper and lower knife disengagement or movement.

C, High-pressure fan through the blowing pipe diversion, the waste edge come out

D, 30MM Main wall plate: The use of steel wall panels, effective damping, to facilitate the smooth operation of the machine at high speed

E, φ100×950mm Guide roller: chrome plated, polished

 

Rewinding Unit

A, This machine adopts two-axis rolling of the left and right axles. It is equipped with a pressure arm to balance the pressure inside and outside the winding. The drive adopts two frequency conversion vector motors, the uniaxial tension is arbitrarily adjustable, and the winding tension increases with the increase of the winding volume. The winding volume is automatically calculated by the PLC and the control tension is automatically calculated.

B, Servo Motor control rewinding , steel shaft rewinding,and paper core  PLC control tension

Driving unit

A, The inverter is used to control the 5.5KW main motor operation, the speed of the lift is convenient and fast, and the speed adjustment is excessively soft and steady.

Main Electrical Part

A, Centralized control of the cabinet, beautiful and easy to operate. PLC automatic tension control

B, One meter counter  , real-time linear speed real-time, meter meter auto stop function (with deceleration stop function, remember meter basically no error)

C, Button ,Contactor ,air switchair

Detailing Description

The machine adopt the pneumatic lift system for loading material , it can load 1meter diameter and 600mm jumbo roll , easy operate .

High quality web guide, touch screen and Siemens PLC control system, the work condition can be shown real time. Easy operate

The machine adopt surface rewinding system ,it suitable slitting 5mm straw paper , 600mm rewinding diameter paper , The tension is more stable, and the winding product is tight and not loose.

The machine adopt knife and superfine grinding spacer , 2 sets slitting shaft , fix the slitting size , reduce change workload , improve production stability.

Special design for plastic ring rewinding,stronger,recycling , reduce paper tube waste

Siemens PLC control Three servo motor , the slitting speed is 300m/min

Contact us
NEWS
Research and development of smart environmental protection equipment is the goal we have been pursuing

Home

Paper Straw Machine

Service

About Us

Subscribe

Copyright  2018 Ruian Sunlight Machinery Factory All right reserved. Supported by Leadong. Site Map